Call Waiting In The United States; Call Waiting In Sweden; About Call Forwarding; Call Forward All In Us Mode - Cisco ATA 190 Administration Manual

Common Supplementary Services
To conference with both callers at the same time, perform a hook flash, then press 3 on the phone keypad.
Step 5
Once you conference all three callers, the only way to drop a caller is for that caller to hang up.

Call Waiting in the United States

If someone calls you while you are speaking on the phone, you can answer by performing a hook flash.
You cannot conference in all three callers.

Call Waiting in Sweden

If someone calls you while you are speaking on the phone, you can answer by performing a hook flash
then pressing 2 on your phone keypad. You can also perform a hook flash then press 3 later during the
call to create a conference call.
Performing a hook flash then pressing 1 hangs up the first caller and answers the second call. If there is
no answer after one minute, the caller receives a busy signal.
To enable call waiting for Sweden, go to the ATA 190 configuration web page and change the Call
Sequence to ETSI FSK for Sweden.
In ETSI mode, the user must pick up the call waiting rather than start the conference service. The user
Note
cannot trigger the call conference service directly, when there is a call waiting.

About Call Forwarding

ATA 190 supports these call forwarding types: Call Forward All, Call Forward Busy, Call Forward No
Answer.
This feature is implemented by configuration in Cisco Unified Communications Manager. The
administrator can configure the forward destination in Cisco Unified CM to specify the type and
destination of call forwarding. Then, Cisco Unified CM forwards incoming calls without delivering SIP
INVITE messages to the configured line.
ATA 190 can dial a feature code followed by the call forward destination to activate/deactivate call
forward all.

Call Forward All in US Mode

Forward Unconditional
Press #72 on your phone keypad; enter the number you want to forward call to; then press # again.
Canceling Call Forwarding
To cancel call forwarding, press #73 on your phone keypad
Cisco ATA 190 Analog Telephone Adapter Administration Guide for SIP (Version 1.1)
6-6
Chapter 6 Using SIP Supplementary Services
OL-31821-02