Proxy And Registration Section - Cisco SPA2102 Administration Manual

ATA Voice Field Reference
PSTN Line page (SPA3102)
Cisco Small Business ATA Administration Guide
Referor Bye Delay
Refer Target Bye
Delay
Referee Bye Delay
Refer-To Target
Contact
Sticky 183

Proxy and Registration section

Proxy
Use Outbound
Proxy
Outbound Proxy
Controls when the ATA device sends BYE to terminate stale
call legs upon completion of call transfers. Multiple delay
settings (Referor, Refer Target, Referee, and Refer-To
Target) are configured on this screen. For the Referor Bye
Delay, enter the appropriate period of time in seconds.
The default is 4.
For the Refer Target Bye Delay, enter the appropriate
period of time in seconds.
The default is 0.
For the Referee Bye Delay, enter the appropriate period of
time in seconds.
The default is 0.
To contact the refer-to target, select yes. Otherwise, select
no.
The default is no.
If this feature is enabled, the IP telephony ignores further
180 SIP responses after receiving the first 183 SIP
response for an outbound INVITE. To enable this feature,
select yes. Otherwise, select no.
The default is no.
SIP proxy server for all outbound requests.
Enable the use of
parameter and
ignored.
The default is no.
SIP Outbound Proxy Server where all outbound requests
are sent as the first hop.
B
. If set to no, the
is
199