Call Forward, Speed Dial, Supplementary Services, And Ring Settings (Spa8000 And Spa8800) - Cisco SPA2102 Administration Manual

ATA Voice Field Reference
Line page
Cisco Small Business ATA Administration Guide
Tip/Ring Voltage
Adjust
Ring Indication
Delay
Operational Loop
Current Min
Ring Timeout
On-Hook Speed
Ring Threshold
Current Limiting
Enable
Ringer Impedance
Line-In-Use Voltage Determines the voltage threshold at which the SPA-3000
Call Forward, Speed Dial, Supplementary Services, and Ring
Settings (SPA8000 and SPA8800)
On the SPA8000 and the SPA8800, you can configure settings for call forward,
speed dial, and supplementary services, as well as ring settings. For field
descriptions, see “User page,” on page
Choices are {3.1, 3.2, 3.35, 3.5} (V).
The default is 3.5 V.
Choose from {0, 256, 512, 768, 1024, 1280, 1536, 1792}
(ms).
The default is 512ms.
Choices for mA are: {10, 12, 14, 16).
The default is 10 mA.
Choose from {0, 128, 256, 384, 512, 640, 768, 896, 1024,
1152, 1280, 1408, 1536, 1664, 1792, 1920} (ms).
The default is 640 ms.
Choose from {Less than 0.5ms, 3ms (ETSI), 26ms
(Australia)}.
The default is Less than 0.5ms.
Choose from {13.5–16.5, 19.35–2.65, 40.5–49.5} (Vrms).
The default is 13.5-16.5 Vrms.
Enable or disable current limiting.
The default is no.
Choose from {High (Normal), Synthesized (Poland, S.Africa,
Slovenia)}.
The default is High (Normal).
assumes the PSTN is in use by another handset sharing the
same line (and will declare PSTN gateway service not
available to incoming VoIP callers).
The default value is 30.
216.
B
184