Wheel And Tire Torque Specifications; Torque Specifications - Dodge Charger 392 SRT Hellcat 2017 Owner's Manual

CAUTION!
Driving with a hot cooling system could damage your
vehicle. If the temperature gauge reads 240°F (116°C) or
greater pull over and stop the vehicle. Idle the vehicle
with the air conditioner turned off until the pointer
drops back into the normal range 200–230°F (93–110°C).
If the pointer remains at 240°F (116°C) or greater and
you hear a chime, turn the engine off immediately and
call for service.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to ensure that
the wheel is properly mounted to the vehicle. Any time a
wheel has been removed and reinstalled on the vehicle, the
lug nuts/bolts should be torqued using a properly cali-
brated torque wrench using a six sided (hex) deep wall
socket.
WHAT TO DO IN EMERGENCIES 397

Torque Specifications

Lug Nut/Bolt Torque
111 Ft-Lbs (150 N·m)
**Use only your authorized dealer recommended lug nuts/
bolts and clean or remove any dirt or oil before tightening.
Inspect the wheel mounting surface prior to mounting the
tire and remove any corrosion or loose particles.
Wheel Mounting Surface
**Lug Nut/ Lug Nut/Bolt
Bolt Size Socket Size
M14 x 1.50 22 mm
6