Technical Specifications; Vehicle Identification Number (Vin); Brake System; Wheel And Tire Torque Specifications - Dodge CHALLENGER 2021 Owner's Manual

VEHICLE IDENTIFICATION NUMBER (VIN)

The VIN is on the left front corner of the
instrument panel. The VIN is visible from
outside of the vehicle through the windshield.
Windshield VIN Location
NOTE:
It is illegal to remove or alter the VIN.

TECHNICAL SPECIFICATIONS

BRAKE SYSTEM

Your vehicle is equipped with dual hydraulic
brake systems. If either of the two hydraulic
systems loses normal capability, the remaining
system will still function. There will be some loss
of overall braking effectiveness. This may be
evident by increased pedal travel during
application, greater pedal force required to slow
or stop, and potential activation of the Brake
Warning Light.
In the event power assist is lost for any reason
(for example, repeated brake applications with
the engine off), the brakes will still function. The
effort required to brake the vehicle will be much
greater than that required with the power
system operating.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to
ensure that the wheel is properly mounted to
the vehicle. Any time a wheel has been removed
and reinstalled on the vehicle, the lug nuts/
bolts should be torqued using a properly
calibrated torque wrench using a six sided (hex)
deep wall socket.
T S
ORQUE PECIFICATIONS
Lug Nut/Bolt **Lug Nut/
Torque Bolt Size
130 Ft-Lbs
M14 x 1.50
(176 N·m)
**Use only authorized dealer recommended
lug nuts/bolts and clean or remove any dirt or
oil before tightening.
335
Lug Nut/Bolt
Socket Size
22 mm
9