Technical Specifications; Vehicle Identification Number (Vin); Brake System; Wheel And Tire Torque Specifications - Dodge Durango 2024 Owner's Manual

Table of Contents

Advertisement

VEHICLE IDENTIFICATION NUMBER (VIN)

The VIN is found on a label located on the left front cor-
ner of the instrument panel pad, visible from outside of
the vehicle through the windshield.
Windshield VIN Label Location
NOTE:
It is illegal to remove or alter the VIN.

BRAKE SYSTEM

Your vehicle is equipped with dual hydraulic brake sys-
tems. If either of the two hydraulic systems loses normal
capability, the remaining system will still function. How-
ever, there will be some loss of overall braking effective-
ness. You may notice increased pedal travel during appli-
cation, greater pedal force required to slow or stop, and
potential activation of the Brake Warning Light.

TECHNICAL SPECIFICATIONS

In the event power assist is lost for any reason (i.e.,
repeated brake applications with the engine off) the
brakes will still function. However, the effort required to
brake the vehicle will be much greater than that
required with the power system operating.

WHEEL AND TIRE TORQUE SPECIFICATIONS

Proper lug nut/bolt torque is very important to ensure
that the wheel is properly mounted to the vehicle. Any
time a wheel has been removed and reinstalled on the
vehicle, the lug nuts/bolts should be torqued using a
properly calibrated torque wrench using a six-sided
(hex) deep wall socket.

TORQUE SPECIFICATIONS

Base Model Vehicle
Lug Nut/Bolt
**Lug Nut/Bolt
Torque
130 ft-lb
(176 N·m)
SRT Model Vehicle
Lug Nut/Bolt
**Lug Nut/Bolt
Torque
110 ft-lb
(149 N·m)
**Use only authorized dealer recommended lug nuts/
bolts and clean or remove any dirt or oil before
tightening.
Lug Nut/Bolt
Size
Socket Size
M14 x 1.50
22 mm
Lug Nut/Bolt
Size
Socket Size
M14 x 1.50
22 mm
Inspect the wheel mounting surface prior to mounting
the tire and remove any corrosion or loose particles.
Wheel Mounting Surface
Tighten the lug nuts/bolts in a star pattern until each
nut/bolt has been tightened twice. Ensure that the
socket is fully engaged on the lug nut/bolt (do not
insert it half way).
NOTE:
If in doubt about the correct tightness, have them
checked with a torque wrench by an authorized dealer
or service station.
After 25 miles (40 km), check the lug nut/bolt torque to
be sure that all the lug nuts/bolts are properly
tightened.
301
9

Advertisement

Table of Contents
loading

Table of Contents