[Punch Regist Loop Size Adjustment]; [Paper Alignment Plate Settings]; [Density Adjustment]; [Image Stabilization] - Muratec MFX-C2280 User's Manual Copy Operations

[Punch Regist Loop Size Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [Punch Regist Loop Size Adjustment]
If the positions of the punch holes on the paper are not in parallel with the paper edge, use this option to
correct the obliquity of the paper to make them parallel.
This adjustment is possible when the Finisher C2280FN2 and Punch Kit C2280PUN, or the Finisher
C2280FN and Punch Kit C2280PUN are installed.
Settings
[Paper Type]
[Adjust Value]
Tips
- Make adjustment while checking paper punched at a displaced position.

[Paper Alignment Plate Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [Paper Alignment Plate Settings]
If paper is not discharged with the edges aligned, use this option to adjust the effective width of the paper
alignment plate for making discharged paper stored neatly.
Settings
[ Alignment Plate Position
(Back)] / [Alignment Plate
Position (Front)]
[Adjust Value]
Tips
- This adjustment is possible when the Finisher C2280FN is installed.

[Density Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Density Adjustment]
Adjust the density of images that are printed on thick paper, OHP transparencies, or envelops for each paper
type and print color.
To adjust the density of an image that is printed in black and white, select [Black Image Density].
The larger the number, the darker the background.
[0] is specified by default.

[Image Stabilization]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Image Stabilization]
Correct the misalignment or tilt of scanning area caused by changes in the temperature or humidity in the
machine to ensure high quality printing.
Description of Setup Buttons (Administrator Settings)
Description
Select the type of paper that is used to adjust the inclination.
Enter an adjustment value between -4 and 4 by tapping [-] and [+].
• [+]: Tap this key to adjust the inclination of the paper.
• [-]: Tap this key if it is not possible to adjust the inclination with [+] or
paper creases.
[0] is specified by default.
Description
Select the paper alignment plate to adjust the position.
Enter an adjustment value between -10.0 mm and 10.0 mm by tapping [-]
and [+].
[0.0 mm] is specified by default.
17
17-23