[External Application Connection] - Muratec MFX-C2280 User's Manual Copy Operations

[SSL/Port Settings]
To display: [Utility] - [Administrator Settings] - [System Connection] - [OpenAPI Settings] - [SSL/Port Settings]
Configure the OpenAPI communication port and SSL communication settings.
Settings
[SSL Setting]
[Port No.]
[Port Number (SSL)]
[Client Certificate]
[Certificate Verification
Level Settings]
[Authentication]
To display: [Utility] - [Administrator Settings] - [System Connection] - [OpenAPI Settings] - [Authentication]
Select whether to authenticate users accessing via OpenAPI. To authenticate, enter the login name and pass-
word in [Login Name] and [Password].
[OFF] is specified by default.

[External Application Connection]

To display: [Utility] - [Administrator Settings] - [System Connection] - [OpenAPI Settings] - [External Applica-
tion Connection]
Specify whether to connect to external application software via OpenAPI.
[ON] is specified by default.
Description of Setup Buttons (Administrator Settings)
Description
Specify whether to use the SSL for communication or not.
• [Non-SSL Only]: Only non-SSL communication is allowed.
• [SSL Only]: Only SSL communication is allowed.
• [SSL/Non-SSL]: Both SSL communication and non-SSL communica-
tion are allowed.
[Non-SSL Only] is specified by default.
If necessary, change the OpenAPI communication port number.
Normally, you can use the original port number.
[50001] is specified by default.
If necessary, change the SSL communication port number.
Normally, you can use the original port number.
[50003] is specified by default.
Select whether to request a certificate from clients that connect to this ma-
chine. To authenticate clients, select [Enable].
[Disable] is specified by default.
To validate the certificate during SSL communication, select items to be
verified.
• [Expiration Date]: Confirm whether the certificate is within the validity
period. [Confirm] is specified by default.
• [Key Usage]: Confirm whether the certificate is used according to the
intended purpose approved by the certificate issuer. [Do Not Confirm]
is specified by default.
• [Chain]: Confirm whether there is a problem in the certificate chain (cer-
tificate path). The chain is validated by referencing the external certifi-
cates managed on this machine. [Do Not Confirm] is specified by
default.
• [Expiration Date Confirmation]: Confirm whether the certificate has ex-
pired. [Do Not Confirm] is specified by default.
• [CN]: Confirm whether CN (Common Name) of the certificate matches
the server address. [Do Not Confirm] is specified by default.
17
17-61