[Original > Output] - Muratec MFX-C2280 User's Manual Copy Operations

[Original > Output]
To display: [Copy] - [Duplex/Combine] - [Original > Output]
Copy an original onto both sides of paper.
Settings
[Original > Output]
[Binding Position]
[No. of Originals]
[Output]
[Original Direction]
d
Reference
For details about the operation procedure of [Original > Output], refer to page 4-2.
Description of Setup Buttons
Description
Select a combination of the original to be loaded (1-sided original or 2-sid-
ed original) and the copy method (1-sided copy or 2-sided copy).
If you have selected other than [1Sided > 1Sided], also specify [Binding Po-
sition] and [Original Direction].
Select the binding positions of the original and copy.
Select the original binding position when loading a 2-sided original.
• [Auto]: The binding position is specified automatically. When the length
of the long side of the original is 11-11/16 inches (297 mm) or less, the
binding position is set to the long side of paper. When the length of the
long side of the original exceeds 11-11/16 inches (297 mm), the binding
position is set to the short side of paper.
• [Left Bind]: Select this option when the binding position is set to the left
of the original.
• [Right Bind]: Select this option when the binding position is set to the
right of the original.
• [Top Bind]: Select this option when the binding position is set to the top
of the original.
Select the binding position when printing on both sides of paper.
• [Auto]: The binding position of a copy is specified automatically. When
the length of the long side of the original is 11-11/16 inches (297 mm)
or less, the binding position is set to the long side of paper. When the
length of the long side of the original exceeds 11-11/16 inches (297
mm), the binding position is set to the short side of paper.
• [Left Bind]: Select this option when setting the binding position to the
left of a copy.
• [Right Bind]: Select this option when setting the binding position to the
right of a copy.
• [Top Bind]: Select this option when setting the binding position to the
top of a copy.
Specify the orientation of the loaded original.
15
15-9