[Date/Time Settings]; [Daylight Saving Time] - Muratec MFX-C2280 User's Manual Copy Operations

[Yes] is specified by default.
Tips
- This item is available if the Finisher or Job Separator JS-506 is installed on this machine.

[Date/Time Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Date/Time Settings]
Specify the current date and time and time zone of this machine.
Settings
[Current Time]
[Time Zone]

[Daylight Saving Time]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Daylight Saving Time]
Select whether to apply daylight saving time settings. To apply the daylight saving time, specify the daylight
saving time, and the start and end dates.
Settings
[Enable Settings]
[Start/End Settings]
Description of Setup Buttons (Administrator Settings)
Description
Enter the current date and time.
• [Set Date]: Automatically adjust the date and time of this machine using
an NTP server. To perform time adjustment, set the time difference be-
tween UTC and your local time in [Time Zone] and tap [Set Date].
This button is available if an NTP server has been registered by select-
ing [Administrator Settings] - [Network Settings] - [Detail Settings] -
[Time Adjustment Setting].
To automatically adjust the time of this machine using an NTP server, set
the time difference between UTC and your local area in multiples of 30 min-
utes.
Description
Select whether to apply Daylight Saving Time to this machine.
If you select [Yes], enter the number of hours to move the clock forward to
reflect daylight saving time. The current time is set forward to reflect day-
light saving time.
[No] is specified by default.
If you select [Yes] in [Enable Settings], specify the start and end dates and
times for applying the daylight saving time.
Specify the start/end date and time by selecting [Weekly] or [Daily], respec-
tively.
17
17-7