[Power Supply/Power Save Settings]; [Low Power Mode Settings]; [Sleep Mode Settings] - Muratec MFX-C2280 User's Manual Copy Operations

Settings
[Set Paper Name by User]
[Custom Display Settings]

[Power Supply/Power Save Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings]
Configure the settings on how to use the Power key and the machine action in the power save mode.
Settings
[Low Power Mode Set-
tings]

[Sleep Mode Settings]

[Power Key Setting]
[Power Save Settings]
[Enter Power Save Mode]
[Power Consumption in
Sleep Mode]
[Power Saving Fax/Scan]
[Awake from Power Save
Mode by Touching Control
Panel]

[Low Power Mode Settings]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] - [Low
Power Mode Settings]
Change the time to elapse before entering the Low Power mode after the last action on this machine.
In the Low Power mode, the display of the Touch Panel is turned off to reduce power consumption.
The default is [15] min. (allowable range: [2] to [240] min.).
[Sleep Mode Settings]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Power Supply/Power Save Settings] -
[Sleep Mode Settings]
Change the time period before the machine enters the Sleep mode after the last action is carried out.
Sleep mode provides a greater power saving effect than Low Power mode. However, the time required to
return to the normal mode is longer than the time required to recover from the Low Power mode.
The default is [20] min. (allowable range: [2] to [240] min.).
Description of Setup Buttons (Administrator Settings)
Description
Select whether to use custom paper with which a given paper name and
type have been registered. To use custom paper, register paper name and
type to be assigned to it.
Change the view of the main screen for the main menu and each mode in
a user-friendly manner.
Description
Change the time to elapse before entering the Low Power mode after the
last action on this machine.
For details, refer to page 17-4.
Change the time period before the machine enters the Sleep mode after
the last action is carried out.
For details, refer to page 17-4.
Specify whether to use the Power key on the Control Panel as a sub pow-
er off key or power save key.
For details, refer to page 17-5.
When using this machine in the factory default status, select the type of the
Power Save mode you want to switch when pressing the Power key on the
Control Panel.
For details, refer to page 17-5.
Select the timing for the machine to return to the Power Save mode after
printing a job it has received in the Power Save mode from a fax machine
or computer.
For details, refer to page 17-5.
Specify whether to reduce the power consumption in the Sleep mode.
For details, refer to page 17-5.
Specify whether to give priority to power saving when returning from the
Sleep or sub power off mode to a mode other than the copy mode.
When returning to a non-printing mode such as the Scan/Fax mode, the
temperature of the Fusing Unit in this machine is not adjusted, by which
power consumption is reduced.
For details, refer to page 17-5.
Select whether to return to the normal mode without touching the Touch
Panel when the machine is in Low Power mode or Sleep mode.
For details, refer to page 17-6.
17
17-4