Muratec MFX-C2280 User's Manual Copy Operations page 12

1.1 Making a Copy (Basic Operation Flow)
3
If necessary, configure copy settings.
% The setting change is reflected on the image of [Output]. Therefore, you can configure the settings
while checking the output image.
% To reconfigure settings, press Reset.
% For details on copy settings, refer to the respective columns of the following table.
Purpose
To copy by specifying the color, image quality, density, etc.
To print on both sides of paper or combine pages, and save the number of
sheets
To change the paper size or type of the paper to be copied
To staple printed copies or create a booklet
To copy various types of originals, such as card and magazine
To adjust the layout such as specifying the zoom ratio and creating a poster
To insert a cover sheet or blank sheet into copied documents
To add the date, page number, stamp, etc. on copied documents
To remove an unnecessary portion of the original
To prohibit unauthorized copying
To save originals on the hard disk (user box) of this machine
4
If necessary, specify the number of copies using the Keypad.
% To use the Keypad, slide the Control Panel to the left.
% If the [10 Keypad] is assigned to the Register key, pressing the Register key enables you to display
the Keypad on the Touch Panel to enter data.
% To retype the number of copies, press C (Clear).
Copy Operations
1
Reference
page 3-2
page 4-2
page 5-2
page 6-2
page 8-2
page 9-2
page 10-2
page 11-2
page 12-2
page 13-2
page 14-2
1-3