[General Settings] ([Authentication Device Settings]); [Logoff Settings]; [User/Account Common Setting] - Muratec MFX-C2280 User's Manual Copy Operations

[General Settings] ([Authentication Device Settings])

To display: [Utility] - [Administrator Settings] - [User Authentication/Account Track] - [Authentication Device
Settings] - [General Settings]
Configure the login method for IC card authentication or biometric authentication as well as operations to
take place upon authentication.
Settings
[Card Authentication]
[Card Detail Settings]
[Operation Settings]
[Authentication Card
ID Number]
[Bio Authentication]
[Beep Sound]
[Operation Settings]

[Logoff Settings]

To display: [Utility] - [Administrator Settings] - [User Authentication/Account Track] - [Authentication Device
Settings] - [Logoff Settings]
Specify whether to log out automatically when scanning of the original finishes.
[Do not log off] is specified by default.

[User/Account Common Setting]

To display: [Utility] - [Administrator Settings] - [User Authentication/Account Track] - [User/Account Common
Setting]
Configure settings common to user authentication and account track, such as the display of confirmation
window at logout and the method of managing single-color/2-color printing.
Settings
[Logout Confirmation
Screen Display Setting]
[Single Color > 2 Color
Output Management]
[Counter Remote Control]
Description of Setup Buttons (Administrator Settings)
Description
This item is available when the Authentication Unit (IC card type) is in-
stalled.
Allows you to change a setting of the loadable driver for registered IC cards
on the Web browser of this machine.
For details, refer to "User's Guide [Advanced Function Operations]/[Using
the Web Browser Function]".
Select how to log in to this machine.
• [Card Authentication]: Pass the IC card over the authentication unit to
log in.
• [Card Authentication + Password]: Pass the IC card over the authenti-
cation unit, and enter the password to log in.
[Card Authentication] is specified by default.
Specify whether to notify the counter, which collects the use status of this
machine, of the authentication card ID.
[No Notification] is specified by default.
This item is available when the Authentication Unit (biometric type) is in-
stalled.
Select whether to give a "blip" sound when the finger vein pattern is
scanned successfully.
[ON] is specified by default.
Select how to log in to this machine.
• [1-to-many authentication]: A user simply needs to place his or her fin-
ger to log in.
• [1-to-1 authentication]: A user needs to enter the user name and place
his or her finger to log in.
[1-to-many authentication] is specified by default.
Description
Specify whether to display the logout confirmation screen on the Touch
Panel when you log out of the login mode (Recipient User or Public User)
entered by pressing Access.
For details, refer to page 17-56.
Switch settings for single color or 2-color printing between options to han-
dle it as either color or black-and-white printing.
For details, refer to page 17-56.
Specify whether to allow acquisition of counter information managed on
this machine when a remote diagnosis system is used.
For details, refer to page 17-56.
17
17-55