[Paper Tray Settings]; [Auto Tray Selection Settings]; [Auto Tray Switch On/Off] - Muratec MFX-C2280 User's Manual Copy Operations

[Paper Tray Settings]

To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings]
Specify the settings related to selection and switching of paper trays.
Settings
[Auto Tray Selection Set-
tings]

[Auto Tray Switch ON/OFF]

[No Matching Paper in Tray
Setting]
[Print Lists]

[Auto Tray Selection Settings]

To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [Auto Tray Selection Settings]
When you have selected [Auto] in [Paper], select target paper trays for auto tray selection. Also, specify the
priority for the paper trays.
Settings
[Auto Tray Select]
[Tray Priority]
[Auto Paper Selection Set-
ting]
[Auto Tray Switch ON/OFF]
To display: [Utility] - [User Settings] - [System Settings] - [Paper Tray Settings] - [Auto Tray Switch ON/OFF]
When printing originals by specifying a paper tray, select whether to allow auto switching (ATS: auto tray
switching) to the paper tray loaded with paper of the same size when the specified tray runs out of paper.
[Restrict] is specified by default.
Description of Setup Buttons (User Settings)
Description
When you have selected [Auto] in [Paper], select target paper trays for auto
tray selection. Also, specify the priority for the paper trays.
For details, refer to page 16-5.
When printing originals by specifying a paper tray, select whether to allow
auto switching (ATS: auto tray switching) to the paper tray loaded with pa-
per of the same size when the specified tray runs out of paper.
For details, refer to page 16-5.
Select the operation to be taken when there is no appropriate sized paper
in the specified paper tray.
For details, refer to page 16-6.
Specify the default paper tray and printing method (1-sided or 2-sided)
used for printing reports and meter counts.
For details, refer to page 16-6.
Description
When you have selected [Auto] in [Paper], select target paper trays for auto
tray selection. The machine selects the tray loaded with optimal paper
among the target trays.
The trays loaded with normal paper and special paper for 1-sided printing
are included in the target.
Different default values are available for different options installed on this
machine.
Specify the priority for feeding paper among the trays selected in [Auto
Tray Select].
If paper of the same size is loaded in multiple trays, paper is fed from the
tray given higher priority.
Different default values are available for different options installed on this
machine.
If [Auto] is selected for [Paper], you can also specify the trays loaded with
[Thin Paper], [User Paper 1], and [User Paper 2] for target trays. Select tar-
get paper for auto paper selection, and specify the priority order.
For details on User Paper, contact your service representative.
16
16-5