Muratec MFX-C2280 User's Manual Copy Operations page 50

2
Tap [Application] - [No. of Originals] - [Separate Scan], and set to [ON].
3
Press the Start key.
The original is scanned.
4
Load the next original, then press Start key.
% If desired, tap [Change Setting] to change the copy settings according to the new original.
5
Repeat Step 4 until all pages of the original are scanned.
6
After all originals are scanned, tap [Finish] and press the Start key.
Copying begins.
Related setting
- You can select whether to scan originals continuously at all times even though [Separate Scan] is not
specified when scanning originals using the Original Glass (Default: [OFF]). For details, refer to
page 16-7.
- You can select the timing that the copy begins when scanning an original by specifying [Separate Scan].
(Default:[Page Print]) For details, refer to page 16-12.
Specifying the Original Size and Scan Method
7
7-5