[Finishing Program]; [Card Shot Settings]; [Change Password]; [Change E-Mail Address] - Muratec MFX-C2280 User's Manual Copy Operations

[Finishing Program]

To display: [Utility] - [User Settings] - [Copier Settings] - [Finishing Program]
Select whether to display finishing program keys in the main screen of the copy mode.
By arranging a frequently used finishing setting to the finishing program, you can specify the finishing setting
only by tapping the program key in the main screen of the copy mode.
Tips
- This item is available when the Finisher is installed.

[Card Shot Settings]

To display: [Utility] - [User Settings] - [Copier Settings] - [Card Shot Settings]
Specify the default setting of [Card Shot] in [Application], and register the original size. With [Card Shot], the
registered size can be invoked.
Settings
[Layout]
[Zoom]
[Store Original Size]

[Change Password]

To display: [Utility] - [User Settings] - [Change Password]
Change the password of the user who is logged in through user authentication.

[Change E-Mail Address]

To display: [Utility] - [User Settings] - [Change E-Mail Address]
Change the E-mail address of the user who is logged in through user authentication.
Tips
- This option is available when a user's change is permitted by the administrator.

[Register Authentication Information]

To display: [Utility] - [User Settings] - [Register Authentication Information]
Register or delete the biometric authentication information or IC card authentication information of the user
who is logged in through user authentication.
Tap [Edit], then register authentication information. To delete authentication information, tap [Delete].
Tips
- You can specify this option when you install the Authentication Unit and you are allowed to change
the setting by the administrator.
Description of Setup Buttons (User Settings)
Description
Select the default setting where to place the front and back sides of a card.
• [Top/Bottom]: Place the front side on the top and the back side on the
bottom of the paper.
• [Left/Right (Upper Half)]: Place the front side on the upper left and the
back side on the upper right of paper.
• [Left/Right]: Place the front side on the left and the back side on the
right of paper.
[Top/Bottom] is specified by default.
Select the default zoom ratio for copying.
• [Full Size]: Makes a copy that fits to the original size.
• [x1.0]: Copy with the same size as the card.
[Full Size] is specified by default.
Register a size of card to be copied. Up to four sizes can be registered by
entering sizes then tapping the Size key.
To give the card size a descriptive name, tap [Original Name].
16
16-14