[Change Registered Overlay]; [Biometric/Ic Card Info. Registration]; [Synchronize User Authentication & Account Track]; [Expert Adjustment] - Muratec MFX-C2280 User's Manual Copy Operations

[Change Registered Overlay]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Access to
Job Settings] - [Change Registered Overlay]
Select whether to allow the user to overwrite or delete a registered overlay image.
[Allow] is specified by default.

[Biometric/IC Card Info. Registration]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Access to
Job Settings] - [Biometric/IC Card Info. Registration]
Select whether to allow the user to register or delete a user's biometric or IC card authentication information.
[Restrict] is specified by default.
[Synchronize User Authentication & Account Track]
To display: [Utility] - [Administrator Settings] - [System Settings] - [Restrict User Access] - [Restrict Access to
Job Settings] - [Synchronize User Authentication & Account Track]
Specify whether to allow users to change the settings for synchronizing user authentication and account
track when user authentication and account track are enabled.
You can set this option by selecting [Synchronize by User] in [Administrator Settings] - [User Authentica-
tion/Account Track] - [General Settings] - [Synchronize User Authentication & Account Track].
[Allow] is specified by default.

[Expert Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment]
Specify this setting if the color tone of print image, staple, hole-punch, and folding positions are changed.
You can adjust various settings such as correction of printed image, adjustment of staple, hole-punch, and
folding positions.
Settings
[AE Level Adjustment]
[Printer Adjustment]
[Finisher Adjustment]
[Density Adjustment]
[Image Stabilization]
[Paper Separation Adjust-
ment]
[Color Registration Adjust]
[Gradation Adjustment]
[Scanner Area]
[ADF Adjustment]
Description of Setup Buttons (Administrator Settings)
Description
Adjust the AE (Auto Exposure) level.
For details, refer to page 17-13.
Adjust the print start position and defective print images.
For details, refer to page 17-13.
Adjust the staple, punch or fold position.
For details, refer to page 17-17.
Adjust the density of images that are printed on thick paper, OHP transpar-
encies, or envelops for each paper type and print color.
For details, refer to page 17-23.
Correct the misalignment or tilt of scanning area caused by changes in the
temperature or humidity in the machine to ensure high quality printing.
For details, refer to page 17-23.
Adjust the paper separation position on each side of paper for 2-sided
printing.
For details, refer to page 17-24.
Adjust the print position with respect to each color if color shifts are detect-
ed in the print result.
For details, refer to page 17-25.
Adjust gradation when reproduction quality of the printed image is degrad-
ed.
For details, refer to page 17-26.
Adjust the scan range of the scanner. For details, contact your service rep-
resentative.
Make adjustments for scanning images in the ADF. For details, contact
your service representative.
17
17-12