[Erase Leading Edge]; [Vertical Adjustment]; [Media Adjustment] - Muratec MFX-C2280 User's Manual Copy Operations

[Erase Leading Edge]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment]
- [Erase Leading Edge]
Adjust leading edge erase width. For details on displaying this item, contact your service representative.

[Vertical Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment]
- [Vertical Adjustment]
Adjust the feed direction zoom ratio of paper types. For details on displaying this item, contact your service
representative.

[Media Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Printer Adjustment]
- [Media Adjustment]
Adjust print defects (voids, white spots, roughness) that are caused by paper properties for each paper type.
Copy or print after configuration, then repeat adjustments as required.
Settings
[Front]/[Back]
[Paper Type]
[Adjust Value]
Description of Setup Buttons (Administrator Settings)
Description
Select the side of paper subject to defect adjustment depending on the
resolution.
• [Front]: Select this option if defective images are found on the front side
of 1-sided or 2-sided printing.
• [Back]: Select this option if defective images are found on the back side
of 2-sided printing.
Select the type of paper that is used to adjust defects.
Enter an adjustment value between -8 and +7 by tapping [-] and [+].
• [-]: Tap this button if a print image has voids or white spots.
• [+]: Tap this button if the surface of the print image is rough.
[Auto] is specified by default.
17
17-16