Muratec MFX-C2280 User's Manual Copy Operations page 221

Settings
[Personal Data Security
Settings]
[Hide Personal Information
(MIB)]
[Display Activity Log]
[Initialize]
[Secure Print Only]
[Copy Guard]
[Password Copy]
[Web browser contents ac-
cess]
[TX Operation Log]
Description of Setup Buttons (Administrator Settings)
Description
Specify whether to hide personal information, such as destination and file
name, in [In Progress] and [Log] on the [Job List] screen.
For details, refer to page 17-68.
Specify whether or not to display the file name, destination, and User Box
name and number of the MIB information.
For details, refer to page 17-68.
Select whether to show the activity log on Scan, Fax TX and RX.
For details, refer to page 17-68.
Initializes the settings in [Job History], [Copy Program], [Network Settings],
and [Store Address].
For details, refer to page 17-69.
Specify whether the printing from the computer should be limited only to
the security document.
For details, refer to "User's Guide [Print Operations]/[Description of Setup
Buttons (Administrator Settings)]".
Select whether to use Copy Guard.
To use Copy Guard, the Security Kit is required.
For details, refer to page 17-69.
Select whether to use the Password Copy function.
To use the Password Copy function, the Security Kit is required.
For details, refer to page 17-69.
Specify whether to allow an access to the Web page contents being saved
on the hard disk of the MFP.
For details, refer to page 17-69.
Select whether to obtain an operation log on the Control Panel when
scanning or sending a fax as a send operation log. This will help to analyze
security issues if any occur.
For details, refer to page 17-69.
17
17-65