Replacement Procedure 4-65 Sensor Plate Assy - Citizen OP900II Technical Manual

Replacement Procedure 4-65 Sensor Plate Assy（It is necessary to resolve mecha Assy to remove
these parts）
4-68 Auto Cutter Unit
2-12 PCB MECHA SENSOR Assembly
4-8 spring_paper_holder_LC
Each roller or shaft at 4-33, 4-71, 4-15, 4-32, 4-14, 4-12, 4-13
4-53 GEAR_HEAD_PINCH_IDLE
4-5 Spring_Mecha_Open
4-23 cover_cable
Please remove the parts respectively.
Mecha Frame R Assy, Mecha Frame L Assy
The parts can be removed by removing the screws in
10 places.
Note) Check the warnings for all parts. Sensor voltage, cut and print position adjustments must be performed.
(refer to Ch.4)
Mecha Flame L Assy
Mecha Flame R Assy
29