Cleaning The Grip Roller And Pinch Roller - Citizen OP900II Technical Manual

Cleaning the Grip Roller and Pinch Roller

Caution
・Before performing maintenance, turn the power OFF, and unplug the power and USB cables.
【Advance preparation】Create of cleaning sheet.
Create a sheet of paper with double-sided tape on it (on the back of the sheet when printer is initialized).
1, Open the printer and remove mecha cover R.
2. When cleaning the grip roller, insert the paper into the printer with the double-sided sticky tape facing
down. (For the pinch roller, insert the paper with the double-sided sticky tape facing up.)
３, Turn the cam in the direction of the arrow, and align the hash-mark with the metal edge. (So the
media can be advanced.)
Paper（Back）
Double-sided tape
Width
Strength
Recommended ：Nichiban Co., Ltd.
Double-sided sticky tape face down (for the Grip Roller)
Double-sided sticky tape face up
Turn the cam
in the direction
of the arrow.
9
：50mm
：Normal～Strength
Nice tack NW-50
3M Scotch PGD-50 etc.
(for the Pinch Roller)
Hash-mark with
the metal edge.