Replacement Procedure 4-71 Roller_Grip - Citizen OP900II Technical Manual

Replacement Procedure 4-71 ROLLER_GRIP

①Disengage the outer side of the 4-7 SPRING_PINCH in 2 places, left and right
Note) This is a powerful spring. Use caution to avoid injury.
②Remove the E Ring of 2 places.(4-46, 6-26)Next, remove the 4-26 Bush.3B and the 6-1 Plate_Pinch_Up_R.
③Remove the 4-44 E Ring.
Note）When the 4-4 Grip Roller Spring broke out, so beware of injury or damage.
④4-4 Grip Roller Spring, 4-43 Spacer_Grip_Spring
Remove the 4-29 Bearing(d8-D14 F).
⑤Pull the 4-71 ROLLER_GRIP.
Note) There are numerous bumps on the roller to help feed the paper. If these bumps come in contact
with metal, etc., the paper feed can be affected. Please use care.
⑥4-45 E Ring , 4-22 Pulley,Grip Roller, 4-11 Wave Spring Pin, 4-48 Inverted ring.
Remove the 4-29 Bearing (d8-D14 F).
Mecha Flame L Assy
6-1 Plate_Pinch_Up_R
Mecha Flame R Assy
23
4-44 E ring
4-4 Grip Roller Spring
6-26 E ring
4-46 E ring
4-26 Bush,3B