Replacement Procedure 2-30 Ribbon Winding Assy; Replacement Procedure 2-35 Main Pcb Assembly; Replacement Procedure 2-10 Drive Pcb Assy; Replacement Procedure 2-13 Led Pcb Assy - Citizen OP900II Technical Manual

Replacement Procedure 2-30 Ribbon Winding Assy

①Connector of one place (refer to Wiring Diagram 2)
②2-6 Springs
③E Ring 1 place
④2-3 PLATE_HEAD_Holder 2 screws
⑤Slide the Head Assy to the right.
⑥Remove the 2-30 Ribbon Winding Assy while rotating.
Note）Rotating metal parts that are in contact should be lubricated.

Replacement Procedure 2-35 Main PCB Assembly

Each FFC（refer to Wiring Diagram 2）4 screws
Note）When replacing, the various adjustments must be performed (refer to Ch.4)

Replacement Procedure 2-10 DRIVE PCB Assy

Each connector, FFC 5 screws
Note) When replacing, the various adjustments must be performed (refer to Ch.4)

Replacement Procedure 2-13 LED PCB Assy

FFC(Main PCB Assembly) of 1 place（refer to Wiring Diagram 2）1 screw.
Replacement Procedure 2-12PCB MECHA SENSOR Assembly
Each connector（refer to Wiring Diagram 6）1 screw.

Replacement Procedure 2-33 RFID PCB Assembly

FFC of 1 place （refer to Wiring Diagram 3）Detach it with the hook.（refer to Detail drawing 1）
[S]
[S]
M
Mecha Assy
19
M
Flame Assy