Replacement Procedure 2-29 Head Frame Assembly
①connectors(refer to the figure below)
②2-3 PLATE_HEAD_Holder 2 screws
③2-7 Spring
Note) When the spring is removed, the Mecha Assy could drop. Use caution.
④Slide the Head Assy right and lift it up.
Note)Note) Be careful of the Ribbon Rewind Assy gear when sliding it.
Note) ) When replacing, the various adjustments must be performed
(refer to Ch.4)
Mecha Assy
Head Assy 10pin 4pin
Flame Assy
18
Front
The attachment direction