Table of Contents
Advertisement
5，Driver board setting
When Replacing the Main Board or the Driver Board.
① When replacing the Driver Board, check the value on the seal of the driver board.
When replacing the Main Board, check the value on the revision seal or the driver board.
② Under the "Option" menu, click on "Driver Adjustment".
③ Enter the value checked in ①, and click on "Setup".
④ Click on "Get" and check the "Driver Adj value".
⑤ When replacing the driver boad,write the adjusted values on the Revision seal on the bottom inside
the printer.
There is a Revision seal on the bottom
inside the printer, with setting value
when the printer left the factory. Write
the newly adjusted values on the seal.
55
Advertisement
Table of Contents
