MLT-288 Service Manual
(12) Insert the mounting screw (M1.7 x 8) into the mounting hole for the motor on the left side of the frame
assembly and secure the motor.
Rear
Frame ASSY
Mounting screws (M1.7x8)
This is the end of reassembling work of the printer body.
3-3-2 Head SP ASSY Reassembling Procedure
(1) Align the head SP with the two projections on the head assembly and insert. Secure with two mounting
screws (M1.7 x 2).
This completes the assembly of the head SP ASSY.
Head SP
Head ASSY
Mounting screws (M1.7x2)
16