Replacement Procedure 4-53 Gear_Head_Pinch_Idle - Citizen OP900II Technical Manual

Replacement Procedure 4-53 GEAR_HEAD_PINCH_IDLE

R Side
①Remove the 4-9 BELT_TIMING, the 4-51 ROLLER_TENTIONER, and the 4-22 Pulley, Grip Roller.
②Remove the 4-45 E Ring
L Side
①Remove the 2-12 PCB MECHA SENSOR Assembly.
②Remove the 5-7 Guide_Cable.
③Remove the 4-45 E Ring.
Note）By removing 4-53 GEAR_HEAD_PINCH_IDLE , 4-10 Straight Pin can drop.
Be sure not to lose it.
Note）During Assembly of the gear. 5-15 GEAR_HEAD_PINCH_CAM_L and 6-11 parts CAM
configuration must be matched on left and right sides. If they are not matched, it won't operate
properly.
L
Mecha Flame L Assy
Mecha Flame R Assy
25
L