Illegal Head Temperature
Event
The media temperature
cannot be detected.
Power Supply Fan Stopped
Event
Power fun stopped.
Cutter Error
Event
The cutter stop in mid-cut,
or keeps going and is
damaged.
Illegal Media Temperature
Event
The media temperature
cannot be detected.
Cause and Solution
Incorrect harness connection.
Faulty thermal print head. → Replace
Thermal printer head. ⇔ Damage of Harness or FFC
Faulty main board. → Replace
Cause and Solution
Incorrect harness connection, or it is damaged.
Faulty fun or life cycle. → Replace
Damage or main board or driver board. → Replace
Cause and Solution
Cut scraps have accumulated in the Scrap Box, causing
multi-layer cutting. → Discard the cut scraps.
Incorrect harness connection, or it is damaged.
Faulty cutter or life cycle. → Replace the cutter
Faulty sensor board. → Replace the sensor board.
Check the connections of harness connecting the sensor and
the sensor board.
Check the connections of FFC Connecting the drive board
and the main board.
Faulty driver board. → Replace
Faulty main board. → Replace
Cause and Solution
Incorrect harness connection.
Damage of harness. → Replace
Damage of media temperature sensor. → Replace
Faulty sensor board. → Replace the sensor board.
Faulty or Check the connector between the sensor board and
main board.
Check the FCC connection between the driver board and
main board.
Faulty driver board. → Replace
Faulty main board. → Replace
65
Reference
App
Harness Diagram
Ch.2 2-32
Ch.2 2-15, 2-29
Ch.2 2-35
Reference
App
Harness Diagram
Ch.2
3-40
Ch2 2-10, 2-35
Reference
User's Manual
App
Harness Diagram
Ch.2 4-68
Ch.2 2-12
Ch.2 4-61
Ch.2 2-16, 2-17
Ch.2 2-10
Ch.2 2-35
Reference
App
Harness Diagram
Ch.2 4-62
Ch.2 4-63
Ch.2 2-12
Ch.2 4-61
Ch.2 2-16, 2-17
Ch.2 2-10
Ch2 2-35