Table of Contents
Advertisement
Alcohol that can be used for cleaning
･Ethyl alcohol (reagent ethanol grade 1, absolute ethanol, etc.) (99.5v/v%)
2-propanol (IPA, isopropyl alcohol) (99.5v/v%)
･
Caution
・ Except for the specified alcohol cleaners, do not use other agents such as benzene, thinners,
etc. as these could damage rubber and resin parts..
Cleaning the Platen Roller
Caution
・Be careful to avoid injury and damage due to the sharp edges.
If any impressions appear regularly in the same place on the prints, or if there are marks on the back
(white side) in the same place on the prints, please clean the platen roller.
paper scraps, or other grime from the ribbon, etc., on the platen roller.
1. Use gauze or some other soft cloth moistened with ethyl alcohol.
Only use ethyl alcohol. Never use benzene, thinner, etc, as they may permeate the resin.
2. Wipe any dirt off while rotating the platen roller.
C
h
a
p
t
e
r
1
C
h
a
p
t
e
r
1
C
l
e
a
n
i
n
C
l
e
a
n
i
n
8
g
g
There could be powder,
Advertisement
Table of Contents
