Disassembly Procedure - Citizen CBM-270 Service Manual

Line thermal printer

Hide thumbs Also See for CBM-270:

Table of Contents

each setscrew unless required.

(2) After inspecting the printer, be sure to confirm that it is free from error.

(3) Never try to print without setting the printing paper in the printer. Confirm that it is properly set.

(4) In case of maintenance work, be careful not to leave the used parts or screws in the printer.

(5) When handling the thermal head or control board, do not wear the gloves which will easily cause static

electricity.

Prior to handling it, discharge static electricity from your body.

maintenance work in a place where the printer will be easily electrified.

(6) When disassembling and reassembling, check the cords and boards for any damage, and do not cable or fix

them in an inappropriate manner by force.

(7) Never carry out maintenance work with the power turned on.

3.1

Disassembly Procedure

1. Prior to Disassembly

(1) Disconnect all the cables from the rear of the main body. For your safety, unplug a power cord from a

plug socket.

(2) Leave the printer cover attached.

CBM-270 Service Manual

Also, never conduct

Table of Contents