Removing And Installing The Front Bezel Assembly; Removing The Front Bezel Assembly; Figure 13. Removing Front Bezel Assembly (Dp/Ws/Brp Configuration Shown) - Intel SC5650-DP Service Manual

Removing and Installing the Front Bezel Assembly

All configurations of the Intel
assembly.

Removing the Front Bezel Assembly

1. Observe the safety and ESD precautions listed in
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Disconnect the AC power cord.
4. Remove the left side cover. For instructions, see
5. Disengage the two bezel tabs from the left side of the chassis (see letter "A" in the
following figure). Rotate the left side of the front bezel assembly outward slightly (see
letter "B"). Disengage the three clips that attach the right side of the front bezel
assembly to the chassis and remove (see letter "C").

Figure 13. Removing Front Bezel Assembly (DP/WS/BRP configuration shown)

®
Intel Chassis SC5650-DP/WS/BRP/UP Service Guide
®
Server Chassis SC5650 ship with a two-piece front bezel
A
A
B
TP02034
Hardware Installations and Upgrades
Appendix A, "Safety
"Removing the Left Side
C
C
C
Information".
Cover".
17