Hot Swap Drive Cage Upgrade Install Instructions (optional)
13. Align the fan bracket with the three pegs on the drive cage (see letter "A" in the
following figure) and slide the fan bracket into position. Replace the two thumb
screws (see letter "B").
Caution:
Figure 82. Attaching Fan Bracket to Expanded Hot Swap Drive Cage
66
The backplane may have slipped once the thumb screws were removed.
Ensure the backplane is positioned correctly before re-tightening the
thumb screws.
B
A
B
®
Intel
AF002937
Server Chassis SC5650-DP/WS/BRP/UP Service Guide