3. Remove the left side cover. For instructions, see
4. Open the back panel PCI Add-in Card Retention Device by pressing open from the
inside of the chassis.
Figure 40. Opening PCI Add-in Card Retention Device (DP/WS/BRP configuration
5. If it is already not removed, remove the PCI slot shield by pushing the shield out from
the inside of the chassis.
6. Remove a PCI add-in board from its protective wrapper. Be careful not to touch the
components or gold-edge connectors. Place the board on an anti-static surface. Record
the type and serial number of the add-in board in your equipment log. Set jumpers or
switches on the board according to the manufacturer's instructions.
®
Intel
Chassis SC5650-DP/WS/BRP/UP Service Guide
shown)
Figure 41. Removing PCI Slot Shield
Hardware Installations and Upgrades
"Removing the Left Side
TP01744
Cover".
TP02049
37