Server System Features
Removing and Installing the Front Bezel
Removing the Front Bezel
If your system includes a front bezel, follow these steps to remove the front bezel:
1. Unlock the bezel if it is locked.
2. Remove the left end of front bezel from rack handle (see letter A).
3. Rotate the front bezel anticlockwise to release the latches on the right end from the rack
handle (see letter B).
Installing the Front Bezel
Note: Before installing the bezel, you must install the rack handles.
1. Lock the right end of the front bezel to the rack handle (see letter A).
2. Rotate the front bezel clockwise till the left end clicks into place (see letter B).
3. Lock the bezel if needed.
16
Figure 20. Removing the Front Bezel
®
Intel
Server System R1000EP Service Guide