Hardware Installations and Upgrades
6. (For UP configuration) Remove fan duct assembly and system fan by pushing the left
and right tabs outward and disengaging from snap-in bracket.
Figure 55. Removing Fan Duct / System Fan Assembly (UP configuration)
7. For Intel
new system fan in the snap-in bracket is shown in the following figure.
8. (For all server boards on DP/WS/BRP configuration EXCEPT Intel
S5500BC) Re-install the fan duct / system fan assembly.
46
®
Server Board S5500BC only, install the fan guard. For installation, the
3
Figure 56. Installing System Fan in Chassis
®
Intel
Chassis SC5650-DP/WS/BRP/UP Service Guide
1
®
Server Board