Figure 60. Removing Fixed Power Supply From Chassis; Figure 61. Inserting Fixed Power Supply In Chassis - Intel SC5650-DP Service Manual

6. Once the fixed power supply is loose, push the power supply against the blue locking
mechanism and then lift the power supply out of the chassis.

Figure 60. Removing Fixed Power Supply from Chassis

7. Insert the new fixed power supply in chassis. Ensure the blue locking mechanism is
still in the open position. Make sure the new fixed power supply rests on the small
metal shelf on the side wall of the chassis (see letter "A" in the following figure).

Figure 61. Inserting Fixed Power Supply in Chassis

®
Intel Chassis SC5650-DP/WS/BRP/UP Service Guide
Hardware Installations and Upgrades
A
TP01754
TP01753
49