For Cable Connection Inside Node Tray; Removing And Installing The Front Bezel; Removing The Front Bezel; Installing The Front Bezel - Intel H2000WP Series Service Manual

For cable connection inside Node tray

Removing and Installing the Front Bezel

Removing the Front Bezel

If your system includes a front bezel, follow these steps to remove the front bezel:
1. Unlock the bezel if it is locked.
2. Remove the left end of front bezel from rack handle (see letter A).
3. Rotate the front bezel anticlockwise to release the latches on the right end from the rack
handle (see letter B).

Installing the Front Bezel

Note: Before installing the bezel, you must install the rack handles.
®
Intel Server System H2000WP Family Service Guide
Orange Line: Fan cable connection
Red Line: Mother board power cable connection
Blue line: Fan control signal cable connection

Figure 19. Cable Routing inside Node tray

Figure 20. Removing the Front Bezel

Hardware Installations and Updates
15