Figure 43. Opening Pci Add-In Card Retention Device (Dp/Ws/Brp Configuration Shown); Figure 44. Removing Pci Add-In Board - Intel SC5650-DP Service Manual

4. Open the back panel PCI Add-in Card Retention Device by pressing open from the
inside of the chassis.
Figure 43. Opening PCI Add-in Card Retention Device (DP/WS/BRP configuration
5. Disconnect any cables that may be attached to the PCI add-in board that needs to be
removed.
6. Firmly grab the PCI add-in board by its top edge or upper corners and remove from
the expansion slot on the server board (see letter "A" in the following figure). Place
the removed add-in board in an anti-static protective wrapper. Close the back panel
PCI Add-in Card Retention Device (see letter "B").
®
Intel Chassis SC5650-DP/WS/BRP/UP Service Guide
B
B

Figure 44. Removing PCI Add-in Board

Hardware Installations and Upgrades
shown)
A
TP02049
TP01724
39