Replacing The Front Panel Board; Figure 45. Replacing Pci Slot Shield - Intel SC5650-DP Service Manual

Hardware Installations and Upgrades
7. If available, replace the PCI slot shield by pressing the slot shield into the opening on
the chassis.
8. Reinstall the left side cover. For instructions, see
9. Reconnect all peripheral devices and the AC power cable(s). Power up the server.

Replacing the Front Panel Board

Your server must be operated with a front panel board installed.
Caution: The front panel board is NOT hot-swappable. Before removing or replacing the front
panel board, you must first take the server out of service, turn off all peripheral devices
connected to the system, turn off the system by pressing the power button, and unplug the
AC power cord from the system or wall outlet.
1. Observe the safety and ESD precautions listed in
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the left side cover. For instructions, see
4. Remove the front bezel assembly if it is installed. For instructions, see
Front Bezel
40

Figure 45. Replacing PCI Slot Shield

Assembly".
TP01726
"Installing the Left Side
Appendix A, "Safety
"Removing the Left Side
®
Intel Chassis SC5650-DP/WS/BRP/UP Service Guide
Cover".
Information".
Cover".
"Removing the