Figure 18. Re-Installing Pci Card Guide Into Chassis - Intel SC5650-DP Service Manual

10. If installing a server board, refer to your Intel
Quick Start User's Guide for installation instructions. Use the mounting screws,
bumpers and standoffs (if necessary) that came with your chassis to secure the server
board to the chassis. Make sure the server board is properly seated and then tighten
the screws firmly, starting with the screws at the center of the server board.
If removing a server board, disconnect all cables connected to the server board. For
additional removal instructions, refer to your Intel
Quick Start User's Guide.
11. For Intel
on left side of PCI card guide into slots in chassis (see letter "A" in the following
figure). Swing PCI card guide into chassis until right-side blue tabs snap into place
(see letter "B").

Figure 18. Re-installing PCI Card Guide into Chassis

®
Intel Chassis SC5650-DP/WS/BRP/UP Service Guide
®
Server Board SC5500BC Only: Re-install the PCI card guide. Insert tabs
Hardware Installations and Upgrades
®
Server Board User's Guide and/or
®
Server Board User's Guide and/or
A
B
TP01735
21