Ethernet Interfaces; Saving Configuration Changes; Logging Out - ZyXEL Communications UAG Series Reference Manual

Chapter 1 Command Line Interface
Table 3 Input-Value Formats for Strings in CLI Commands (continued)
TAG
week-day sequence, i.e.
1=first,2=second
xauth method
xauth password
mac address

1.8 Ethernet Interfaces

How you specify an Ethernet interface depends on the UAG model.
• The UAG uses a name such as wan1, wan2, lan1, lan2, or dmz.

1.9 Saving Configuration Changes

Use the
write
Note: Always save the changes before you log out after each management session. All
unsaved changes will be lost after the system restarts.

1.10 Logging Out

Enter the
exit
Enter the
exit
36
# VALUES LEGAL VALUES
1 1-4
1-31 alphanumeric or _-
1-31 alphanumeric or ;|`~!@#$%^&*()_+\{}':,./<>=-
0-12 (even hexadecimal
number) for example: aa aabbcc aabbccddeeff
command to save the current configuration to the UAG.
or end command in configure mode to go to privilege mode.
command in user mode or privilege mode to log out of the CLI.
UAG CLI Reference Guide