Printer-Manager Printer Sub-Commands; Printer-Manager Command Example - ZyXEL Communications UAG Series Reference Manual

Unified access gateway
Hide thumbs Also See for UAG Series:
Table of Contents

Advertisement

Table 114 printer-manager Commands (continued)
COMMAND
show printer-manager button
show printer-manager discover-printer-
status
show printer-manager printer [<1..10>]
show printer-manager printer-status
show printer-manager printerfw version
show printer-manager printout-type
show printer-manager settings
show printer-manager workableIP

36.2.1 Printer-manager Printer Sub-commands

The following table describes the sub-commands for the printer-manager printer command.
Table 115 printer-manager printer Sub-commands
COMMAND
activate
deactivate
description description
printer-ip ipv4_address

36.2.2 Printer-manager Command Example

This example adds a printer to the managed printer list and displays the printer settings.
Router# configure terminal
Router(config)# printer-manager printer 1
Router(printer-manager)# activate
Router(printer-manager)# description cafe
Router(printer-manager)# printer-ip 172.16.0.123
Router(printer-manager)# exit
Router(config)# show printer-manager printer
printer: 1
activate: yes
IPv4 address: 172.16.0.123
description:
Router(config)#
UAG CLI Reference Guide
DESCRIPTION
Displays the name of billing profile that is applied to each button.
Displays information of the printer that is connected to and detected by the
UAG.
Displays settings of all or the specified printer that can be managed by the
UAG.
Displays information about the printers that are connected and can be
managed by the UAG.
Displays the version of the printer firmware currently uploaded to the UAG.
The UAG automatically installs it in the connected printers to make sure the
printers are upgraded to the same version.
Displays the current account printout format.
Displays the printer management settings.
Displays the number and IP address(s) of printer(s) that can synchronize
with the UAG successfully.
DESCRIPTION
Enables the entry.
Disables the entry.
Sets a descriptive name for the printer.
Sets the IP address of the printer.
cafe
Chapter 36 Printer Manager
185

Advertisement

Table of Contents
loading

Table of Contents