Command Line Ftp Configuration File Download Example; Uag File Usage At Startup - ZyXEL Communications UAG Series Reference Manual

Chapter 58 File Manager

58.6.4 Command Line FTP Configuration File Download Example

The following example gets a configuration file named today.conf from the UAG and saves it on the
computer as current.conf.
Figure 26 FTP Configuration File Download Example
C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 FTP Server (UAG) [192.168.1.1]
User (192.168.1.1:(none)): admin
331 Password required for admin.
Password:
230 User admin logged in.
ftp> bin
200 Type set to I
ftp> cd conf
250 CWD command successful
ftp> get today.conf current.conf
200 PORT command successful
150 Opening BINARY mode data connection for conf/today.conf (20220
bytes)
226 Transfer complete.
ftp: 20220 bytes received in 0.03Seconds 652.26Kbytes/sec.

58.7 UAG File Usage at Startup

The UAG uses the following files at system startup.
Figure 27 UAG File Usage at Startup
The boot module performs a basic hardware test. You cannot restore the boot module if it is
1
damaged. The boot module also checks and loads the recovery image. The UAG notifies you if the
recovery image is damaged.
The recovery image checks and loads the firmware. The UAG notifies you if the firmware is
2
damaged.
298
1. Boot Module
2. Recovery Image
3. Firmware
UAG CLI Reference Guide