Packet Flow Explore Commands Example - ZyXEL Communications UAG Series Reference Manual

Chapter 63 Packet Flow Explore

63.3 Packet Flow Explore Commands Example

The following example shows all routing related functions and their order.
Router> show route order
route order: Direct Route, Policy Route, VPN 1-1 Mapping Route, 1-1 SNAT, SiteTo
Site VPN, Dynamic VPN, Static-Dynamic Route, Default WAN Trunk, Main Route
The following example shows all SNAT related functions and their order.
Router> show system snat order
snat order: Policy Route SNAT, VPN 1-1 Mapping SNAT, 1-1 SNAT, Loopback SNAT, De
fault SNAT
The following example shows all activated policy routes.
Router> show system route policy-route
No. PR NO. Source
Nexthop Info
===========================================================================
The following example shows all activated 1-to-1 SNAT rules.
Router> show system route nat-1-1
No. VS Name
===========================================================================
The following example shows all activated site-to-site VPN rules.
Router> show system route site-to-site-vpn
No. Source
===========================================================================
The following example shows all activated dynamic VPN rules.
Router> show system route dynamic-vpn
No. Source
===========================================================================
The following example shows the default WAN trunk's settings.
Router> show system route default-wan-trunk
No. Source
===========================================================================
1 any
318
Destination Incoming
Source Destination
Destination VPN Tunnel
Destination
Destination Trunk
any SYSTEM_DEFAULT_WAN_TRUNK
DSCP Service Nexthop Type
Outgoing Gateway
VPN Tunnel
UAG CLI Reference Guide