Application Object Group Commands - ZyXEL Communications UAG Series Reference Manual

45.1.1.1 application-object Examples
These are some example usage commands.
Router(config)# show application-object
Name
Description
Content
===============================================================================
tests
New Create
Facebook Game (access)
Router(config)# show application-object tests
Name: tests
Description: New Create
Category
Application ID
===============================================================================
Social Network
402685702
Router(config)#

45.1.2 Application Object Group Commands

This table lists the application object group commands.
Table 146 object-group application Commands
COMMAND
show object-group application
object_group_name
object-group application object_group_name
[no] description description
[no] application-object object_name
no object-group application
<object_group_name
object-group application rename
object_group_name1 object_group_name2
UAG CLI Reference Guide
Application
Facebook Game (access)
DESCRIPTION
Displays information on the named application object group.
Creates an application object group. with the specified name. You
may use 1-31 alphanumeric characters, underscores(
), but the first character cannot be a number. This value is case-
sensitive. The no command disables it.
Write a description of the object group.
Adds the named application object to the object group. The no
command removes it.
Deletes the object group with the specified name.
Renames the specified object group with a new name.
Chapter 45 Application Object
Ref
1
), or dashes (-
_
233