Service Group Commands - ZyXEL Communications UAG Series Reference Manual

Table 151 service-object Commands: Service Objects (continued)
COMMAND
service-object object_name icmp icmp_value
service-object object_name protocol <1..255>
service-object rename object_name object_name
47.2.1.1 Service Object Command Examples
The following commands create four services, displays them, and then removes one of them.
Router# configure terminal
Router(config)# service-object TELNET tcp eq 23
Router(config)# service-object FTP tcp range 20 21
Router(config)# service-object ICMP_ECHO icmp echo
Router(config)# service-object MULTICAST protocol 2
Router(config)# show service-object
Object name
=====================================================================
TELNET
FTP
ICMP_ECHO
MULTICAST
Router(config)# no service-object ICMP_ECHO
Router(config)# show service-object
Object name
=====================================================================
TELNET
FTP
MULTICAST

47.2.2 Service Group Commands

The first table lists the commands for service groups.
Table 152 object-group Commands: Service Groups
COMMAND
show object-group service group_name
[no] object-group service group_name
[no] service-object object_name
[no] object-group group_name
UAG CLI Reference Guide
DESCRIPTION
Creates the specified ICMP message using the specified
parameters.
icmp_value: <0..255> | alternate-address | conversion-error |
echo | echo-reply | information-reply | information-request |
mask-reply | mask-request | mobile-redirect | parameter-
problem | redirect | router-advertisement | router-solicitation |
source-quench | time-exceeded | timestamp-reply |
timestamp-request | unreachable
Creates the specified user-defined service using the specified
parameters.
Renames the specified service from the first object_name to
the second object_name.
Protocol Minmum port
TCP 23
TCP 20
ICMP 0
2 0
Protocol Minmum port
TCP 23
TCP 20
2 0
DESCRIPTION
Displays information about the specified service group.
Creates the specified service group if necessary and enters sub-command
mode. The command removes the specified service group.
no
Adds the specified service to the specified service group. The
removes the specified service from the specified group.
Adds the specified service group (second group_name) to the specified
service group (first group_name). The
service group from the specified service group.
Chapter 47 Services
Maxmum port Ref.
23 0
21 0
0 0
0 0
Maxmum port Ref.
23 0
21 0
0 0
no
command removes the specified
no
command
239