Billing Profile Sub-Commands - ZyXEL Communications UAG Series Reference Manual

Chapter 34 Billing
Table 109 billing Commands (continued)
COMMAND
[no] billing discount unit <2..10>
price price
[no] billing profile profile_name
billing profile rename profile_name
profile_name
billing tax-rate <0..100>
[no] billing tax-rate activate
billing unused-expire {day <1..30> |
hour <1..24> | minute <30..60>}
billing username-password-length
<4..6>
[no] billing wlan-ssid-profile
profile_name
show billing discount default rule
show billing discount rule
show billing discount status
show billing profile [profile_name]
show billing status

34.2.1 Billing Profile Sub-commands

The following table describes the sub-commands for the billing profile command.
Table 110 billing profile Sub-commands
COMMAND
[no] activate
bandwidth {upload | download}
<0..1048576> priority <1..7>
178
DESCRIPTION
Creates a new discount level by setting the duration of the billing period
that should be reached before the UAG charges users at this level and
defining this level's charge per time unit.
The no command removes this discount level.
Creates a billing profile and enters the billing profile sub-command
mode to set the price and the duration of the billing period. See
on page 178 for the sub-commands.
The no command removes the specified profile.
profile_name: use up to 31 alphanumeric characters (A-Z, a-z, 0-9) and
underscores (_). Spaces are not allowed. The first character must be a
letter.
Renames the specified billing profile (first profile_name) to the specified
name (second profile_name).
Sets the tax rate. For example, type 6 for a 6% sales tax.
Sets the UAG to charge sales tax for the account.
The no command sets the UAG to not charge sales tax for the account.
Specifies a time unit and number to set how long to wait before the UAG
deletes an account that has not been used.
Sets how manay characters the username and password of a newly-created
dynamic guest account will have.
Sets the name of the SSID profile to which you can apply the general billing
settings.
The no command sets the UAG to not apply the billing settings to the SSID
profile.
Displays settings of the default discount price plan.
Displays settings of the custom discount price plan(s).
Displays billing discount settings.
Displays settings for all or the specified billing profile.
Displays the general billing settings, such as the accounting method or tax
rate.
DESCRIPTION
Enables the billing profile.
The no command disables the profile.
Specifies the maximum bandwidth allowed for the user account in kilobits
per second and types a number between 1 and 7 to set the priority for the
user's traffic. The smaller the number, the higher the priority.
upload refers to the traffic the UAG sends out from a user.
download refers to the traffic the UAG sends to a user.
Table 110
UAG CLI Reference Guide