Dynamic-Guest Command Example - ZyXEL Communications UAG Series Reference Manual

Table 170 dynamic-guest Sub-commands (continued)
COMMAND
remaining-time <1..25920000>
time-period <1..432000>

55.2.2 Dynamic-guest Command Example

This example shows how to create a dynamic guest account, configure the account related settings
and displays the account information.
Router# configure terminal
Router(config)# dynamic-guest generate
[dynamic guest] username:gn0ti7, password:ihzun7
Router(config-dynamic-guest)# charge 5
Router(config-dynamic-guest)# expire-time 2013-06-26 14:00
Router(config-dynamic-guest)# payment-info cash
Router(config-dynamic-guest)# phone 0912345678
Router(config-dynamic-guest)# time-period 1440
Router(config-dynamic-guest)# remaining-time 86400
Router(config-dynamic-guest)# create-time 2013-06-25 14:03
Router(config-dynamic-guest)# exit
Router(config)# show dynamic-guest users
No. Status
Time Period
User Role
====================================================================================
1 Unused
1day 00:00:00
billing-users
Router(config)#
UAG CLI Reference Guide
DESCRIPTION
Sets the amount of Internet access time (in seconds) remaining for the
account.
Sets the total account of time (in minutes) the account can use to access
the Internet through the UAG.
Username Create Time
Remaining Time
gn0ti7 2013-06-25 14:03
1day 00:00:00
Chapter 55 Dynamic Guest Accounts
Expiration Time
Charge ayment Info
2013-06-26 14:00
eur 5,00 cash
Phone Num
0912345678
271