ZyXEL Communications UAG Series Reference Manual page 311

Use these commands to have the UAG e-mail you system statistics every day. You must use the
configure terminal
commands.
Table 201 Email Daily Report Commands
COMMAND
show daily-report status
daily-report
[no] activate
draw-usage-graphics
smtp-address {ip | hostname}
[no] smtp-auth activate
smtp-auth username username password password
no smtp-address
no smtp-auth username
[no] smtp-port <1..65535>
mail-subject set subject
no mail-subject set
[no] mail-subject append system-name
[no] mail-subject append date-time
[no] mail-from e_mail
[no] mail-to-1 e_mail
[no] mail-to-2 e_mail
[no] mail-to-3 e_mail
[no] mail-to-4 e_mail
[no] mail-to-5 e_mail
[no] item cf-report
[no] item cpu-usage
[no] item mem-usage
[no] item port-usage
[no] item session-usage
[no] item traffic-report
schedule hour <0..23> minute <00..59>
[no] reset-counter
UAG CLI Reference Guide
command to enter the configuration mode before you can use these
DESCRIPTION
Displays the e-mail daily report settings.
Enters the sub-command mode for configuring daily e-mail
reports settings.
Turns daily e-mail reports on or off.
Has the report e-mail include usage graphs.
Sets the SMTP mail server IP address or domain name.
Enables or disables SMTP authentication.
Sets the username and password for SMTP authentication.
Resets the SMTP mail server configuration.
Resets the authentication configuration.
Sets the SMTP authentication port. The no command deletes
the setting.
Configures the subject of the report e-mails. Spaces are
allowed.
Clears the configured subject for the report e-mails.
Determines whether the system name will be appended to the
subject of the report e-mails.
Determines whether the sending date-time will be appended
at subject of the report e-mails.
Sets the sender e-mail address of the report e-mails.
Sets to whom the UAG sends the report e-mails (up to five
recipients).
See above.
See above.
See above.
See above.
Determines whether or not content filtering statistics are
included in the report e-mails.
Determines whether or not CPU usage statistics are included
in the report e-mails.
Determines whether or not memory usage statistics are
included in the report e-mails.
Determines whether or not port usage statistics are included
in the report e-mails.
Determines whether or not session usage statistics are
included in the report e-mails.
Determines whether or not network traffic statistics are
included in the report e-mails.
Sets the time for sending out the report e-mails.
Determines whether or not to discard all report data and
starts all of the report statistics data counters over at zero
after successfully sending out a report e-mail.
Chapter 60 Reports and Reboot
311