Command Examples; Registration Status Commands (V4.00 And Later Only) - ZyXEL Communications UAG Series Reference Manual

Chapter 5 Registration

5.3.1 Command Examples

The following commands allow you to register your device with an existing account or create a new
account and register the device at one time, and activate a trial service subscription.
Router# configure terminal
Router(config)# device-register username alexctsui password 123456
Router(config)# service-register service-type trial service content-filter
The following command displays the account information and whether the device is registered.
Router# configure terminal
Router(config)# show device-register status
username
password
device register status : yes
expiration self check
The following command displays the service registration status and type and how many days
remain before the service expires.
Router# configure terminal
Router(config)# show service-register status all
Service
===========================================================================
Content-Filter

5.4 Registration Status Commands (V4.00 and Later Only)

The following table describes the commands available for registration status. You must use the
configure terminal
commands.
Table 10 Command Summary: Registration
COMMAND
show service-register status all
show service-register status extension-user
show service-register status external-ap-
control
show service-register status sms
50
: example
: 123456
: no
Status Type Count
Licensed Trial N/A
command to enter the configuration mode before you can use these
DESCRIPTION
Displays all service license information.
Displays extension-user service license information.
It also displays the maximum number of wired and wireless users
that may connect to the UAG at the same time.
Displays external-ap-control service license information.
It also displays how many managed APs the UAG can support with
your current license.
Displays whether the SMS ticketing service is activated.
Expiration
16
UAG CLI Reference Guide